Taps and filters clogged with limescale? Don’t worry, here’s how you can effectively dissolve limescale in your home faucets with just 3 commonly used ingredients.
Unfortunately, the hardness of our water present in the pipes means that, day after day, layers and layers of limestone accumulate that clog the filters of our taps and create a lot of discomfort. Not everyone in the house has a water softener and that is why we often find ourselves dealing with what comes from it; However, we can also act at home to clean our filters and remove limescale from the taps; Doing so is important given and considering the poor hygiene that results from this problem.
Before proceeding with the thorough cleaning of these elements, it is necessary to specify that it is necessary to dismantle the faucet filter, to do this it is good to pay close attention so as not to damage the chrome plating of our faucet. To do this, use a very soft cloth and possibly a wrench to easily unscrew the structure. After a slight pressure it should have unscrewed and at this point you should find in your hand you will have the components of your faucet so that you can act and remove the limestone that has accumulated inside.
But let’s see how to proceed and with what ingredients!
How to remove limescale from faucets with 3 ingredients.
This technique for removing limescale from faucets is guaranteed and can be used to remove other limescale deposits from any other surface: from the shower tray, from the shower head, from a flower pot or vase, etc.!
It is true that there are countless products on the market, some effective and others less so, but obviously they are very aggressive chemicals both for the surface itself (sometimes they corrode the enamel of the toilets or the chrome of the faucets), but also for the environment that surrounds us!
All you need are 3 very simple ingredients.
- Apple cider vinegar
- Sodium bicarbonate
- Hot water
METHOD.
The intensive action of vinegar makes it one of the best household ingredients for cleaning in general, in this specific case: taps clogged by too much lime. Its descaling action will dissolve the limescale formed in the tap.
To proceed, you will simply have to soak the filter in a container containing very hot water, vinegar and 3 tablespoons of baking soda. Leave it on all night and when you wake up you will see that even the most difficult incrustations will have dissolved and there will be no trace of them left.
If there are still traces of lime, you can use an old toothbrush that you will have to brush over the surface to be scrubbed; You will see that everything will come off easily thanks to the fact that during the night the limestone has had the opportunity to soften and therefore melt.
Once you’ve scrubbed the faucet and its filters, you can rinse everything under running water and reassemble each individual component. You will have an exceptional result and the water flow will come out again as with the correct mode.
Although this method will dissolve all the scale, from time to time it is advisable to replace the filters so that they are new; Its cost is almost insignificant so it is an expense that can be faced from time to time.