The best tips on how to clean your floor and leave it shining like new

Do you know how to clean a floor and leave it looking like new? Over time it is normal for it to get dirty and lose its shine, but if you maintain adequate cleaning it is possible to always leave it preserved.
So follow the advice and techniques of < a i=4>How to Clean the Floor to keep your floor always impeccable and pleasant, keeping your home in an atmosphere of harmony, after all cleaning is always a good deal.

Ardosia Apartment

How to clean the floor
Sweep the floor with a soft bristle broom to remove dust, but do so carefully, as slate is delicate and can be damaged if not done correctly.
In a bucket with 4 liters of water, dissolve 1/5 cup of mild detergent or blackboard cleaner, but not acidic.
Spread the solution on the floor and rub with the help of a cloth and then with a dry cloth, dry as much as possible and leave to dry at room temperature.
After the surface is completely dry, with a soft cloth, spread a thin layer of teak oil to finish with a more thorough cleaning. Do it every two or three months.

How to clean marble floor

Marble is an expensive material, but highly sought after as a floor or decorative element in a home. Therefore it is necessary to carry out correct cleaning so that it does not lose its shine.

Step by step on how to clean marble floor

To keep the marble always beautiful, we initially excluded the use of sanitary water or chlorine during cleaning. Being an abrasive product, it ends up dulling and staining the floor.
To clean the marble floor it is necessary to avoid humidity. Therefore the advice is: every time you put water in, dry it with a cloth to remove the humidity and let it air dry. This way it is possible to maintain the shine for longer.

Hydrogen peroxide

Another trick on how to clean marble flooring is to mix hydrogen peroxide in a bucket of very hot water.
Scrub the surface with a soft broom and remove any moisture immediately afterwards.

Neutral detergent

Put clean water into a bucket and add neutral PH detergent, preferably for cleaning floors.
Using a damp sponge, wash the marble and then rinse with clean water, removing any traces of detergent from the floor. Leave the floor to air dry, without cleaning with a dry cloth.

Tiled floor

How to clean the floor
To clean the lajota, you must first pass the thick-bristled broom over the floor and thus remove all the dirt, paying attention to the nooks and crannies, so that no accumulated residue remains.
In a bucket, mix water with neutral detergent and stir. Wet the cloth, twist it and then pass it over the lajotas with the help of a lazy hand, to be more practical.
It is important to clean the entire surface with a damp cloth until it is very clean . In case of stained ties you can use a dish sponge. If there are stains that are more difficult to remove, you can use a dish sponge to remove the dirt, but do not scrub too hard as this will ruin the shine of the floor. Preferably use the yellow side of the sponge.

How to clean rubber flooring

This rubber floor cleaning technique becomes simple thanks to the versatility of rubber floors. Use a damp cloth and a neutral PH detergent.
First, use a broom to remove dust. Next, put some lukewarm or cold water, as you prefer, in a bucket, dilute the detergent and mix until it forms a foam.
Sprinkle a little water on the floor, and with the broom spread the solution on the surface to be cleaned. Leave the mixture to rest for a few minutes so that it can more easily release all the accumulated dirt and rub with circular movements.
After finishing, rinse and eliminate excess soap and rinse with a soft cloth the floor. It is advisable to dry it well so that it does not accumulate and does not stick to dirt found in another space in the house.
To restore shine and complete hygiene, apply disinfectant or white vinegar . To do this, dilute a little of the chosen product in a little water and wipe the surface with a cloth.

How to clean laminate flooring


While offering comfort and practicality, laminate floors require special care to remain preserved and with the necessary beauty. Therefore, learn how to clean the laminate floor the right way and always keep it beautiful.
First, remove all the dust with a soft broom, so as not to scratch the surface. Subsequently dilute in a bucket with water, a little neutral detergent, alcohol and apply with the help of a cloth on the floor. Then rinse with a dry cloth and you’re done.

How to clean concrete floor

Is your apartment unfinished or undergoing renovation? However, it is necessary to keep the environment clean. Therefore, you know the techniques on how to clean the concrete floor.
Performing this cleaning procedure is not complicated, but you will need some materials to keep this clean place in good condition.
The first step is to sweep the floor with a broom with well-reinforced bristles. If a lot of dirt accumulates in the place, such as dirt or sand, it is advisable to throw water before sweeping, but only a little, so that it does not turn into mud or something similar.
Now, if There is a buildup of dirt on the surface, you can use a pressure hose to remove this debris.
Then, after carrying out this pre-cleaning, use a neutral pH cleaner or degreaser. Never use products with strong chemical substances, as they can deteriorate the material due to the strong concentration of reagents.

How to clean

Apply the products and leave to act for a few minutes. Then scrub gently with a soft, rinsed broom.

Vinyl floors

Remove dust with the help of a hairbrush or vacuum cleaner. Small stains and residues can be removed with a neutral detergent and a damp cloth.
To remove the most difficult stains, use a neutral stain remover exclusively for vinyl floors diluted in water and a soft sponge. To leave the floor shiny after cleaning, use a red wax pad.

How to clean wooden floors

Clean hardwood floors with a soft-bristled broom to avoid scratches, or wipe with a dry cloth to remove dust buildup. Subsequently, use the following techniques to learn how to correctly clean cleated floors and not damage the wood.
• Dilute 1 tablespoon of neutral detergent in 5 liters of water;
• Moisten a clean cloth with this solution, but twist it well, leaving it as dry as possible;
• Pass the cloth over the blocks until all the dirt is removed. If residue remains, clean it later with a clean cloth.
Use our techniques How to clean the floor and maintain your clean and bacteria-free home.

Leave a Comment