Have you ever wondered why gas at home lasts so short? The answer may lie in your burners or stoves. A gas operator taught me that when stoves are dirty or blocked by grease and food residue, the gas burns inefficiently, making it last less.

The accumulation of dirt prevents the flame from having the proper airflow, turning it orange instead of blue, which causes increased gas consumption. In this article, I’ll teach you the simple cleaning trick that made my gas last up to six months. It’s easy, inexpensive, and very effective.

How to make gas last longer

With this simple trick, you can save a lot of money and improve your gas performance at home. The key is regular cleaning and preventive maintenance of the burners.

Materials Needed

Before you begin, make sure you have the following materials on hand:

• Toothpaste (white)
• Salt (2 tablespoons)
• Baking soda (1 tablespoon)
• Liquid detergent (1 tablespoon)
• Hot water
• A container to dip the burner parts into

Step-by-Step Procedure

1. Spot the problem
   If you notice that your kitchen flame is orange instead of blue, it’s a clear sign that the burner is clogged with grease or dirt. This causes the gas to burn out faster than normal.
2. Disassemble the burner
   parts Carefully remove the burner parts from the stove. Make sure they are cold before handling them to avoid burns.
3. Initial cleaning with toothpaste
   • Apply a generous amount of toothpaste to all parts of the burner.
   • Use a brush or sponge to scrub the toothpaste thoroughly over the surface.
   • Toothpaste has mild corrosive properties that will help remove grease and burnt residue.
4. Prepare the cleaning solution
   • Place the burner pieces in a large bowl.
   • Add the two tablespoons of salt, one tablespoon of baking soda, and one tablespoon of liquid detergent.
   • Fill the container with hot water until the pieces are completely covered.
   • Let the pieces soak for 2 hours so that the dirt comes off easily.
5. Rub and rinse
   • After two hours, remove the pieces from the water.
   • If any stubborn dirt remains, gently rub it in with a sponge or brush.
   • Rinse thoroughly with clean water and dry the pieces thoroughly before putting them back in the kitchen.
6. Final check
   • Reassemble the burner parts in place.
   • Turn on the stove and observe the color of the flame.
   • If the fire is blue and strong, the problem is solved.
   • If the flame isn’t completely blue yet, let the cooker run for a couple of minutes to stabilize the gas flow.

Additional Tips

• Clean the burners once a month to prevent the accumulation of grease and debris.
• Avoid spilling liquids or oils on the burners so they don’t clog.
• If the flame is still orange, check the gas nozzles and make sure they are clean and free of obstructions.
• Do not use harsh chemicals to clean burner parts, as they could damage them or affect the flow of gas.
• If the problem persists, consult a professional gas technician to check the installation.

Put this advice into practice and you will notice the difference. If it worked for you, share it with your family and friends so they can save on gas consumption too.